IN-HOUSE MANUFACTURING / 5-AXIS CNC
Our five-axis CNC machining services support angled features, curved surfaces and metal components approached from several faces. Engineering reviews the model, working datums and fixture clearance together to establish which features can share a setup and which require a separate operation.
ENGINEERING SCOPE
605-axis CNC centersCount from the 2025 Dongguan equipment register. Equipment was retained after relocation; confirm current Shenzhen availability during project review.
Part envelope, achievable dimensions, inspection and timing require a drawing-based engineering review.
DRAWING-LED REVIEW
Provide the controlled drawing revision and model. Show angled bores, deep features, undercuts and the surfaces that locate the component. The tool, holder and fixture all need clearance. Five-axis motion does not make every internal feature reachable; engineering reviews the actual model before selecting the route.
An indexed setup and simultaneous five-axis cutting serve different geometries. Review which faces can be machined together and where another setup remains necessary. Thin sections, material condition and finishing operations also affect how the part is supported and when final dimensions are produced.
Identify the datum system and the relationships between angled features, bores and contact faces. Agree the measurement method and report requirements before manufacture. If anodizing or other treatment follows cutting, specify the condition in which each fit is accepted.
